|
텅스텐 카바이드 분말 WC Spray Powder |
||||||
|
제품명 Powder Type |
분말크기 Particle Size |
Loose Density(g/cm³) |
입자 속도 Particle velocity (s/50g) |
용도 Usage |
코팅 특성 Property of coating |
|
|
WC-8853 |
WC-Co 88/12 |
53-20 |
≥4 |
≤18 |
HVOF(JP5000, JP8000/DJ2600/DJ2700/Jet kote/WokaJet/K2 HAVF APS |
HV0.3:(1100-1300) anchoring strength≥ 70Ma deposition rate: 40%-50% porosity ≤1% |
|
WC-8845 |
45-15 |
≥4 |
≤18 |
|||
|
WCA-8845 |
WC-Co 88/12 |
45-15 |
≥4 |
≤18 |
||
|
WCA-8830 |
30-10 |
≥4 |
≤18 |
|||
|
Product Description |
Colour:gray/black powder, Crushed:irregular sharp. Agglomerated&Sintered is ball or samilar with ball with good fluidity. Use max temperature is 500C, the produt is high density |
|||||
|
WC-8353 |
WC-Co 83/17 |
53-20 |
≥4 |
≤25 |
HVOF(JP5000, JP8000/DJ2600/DJ2700 Jet kote/WokaJet/K2 HAVF APS |
HV0.3:(920-1200) anchoring strength≥ 70Ma deposition rate: 40%-55% porosity ≤1% |
|
WC-8345 |
45-15 |
≥4 |
≤25 |
|||
|
WCA-8345 |
WC-Co 83/17 |
45-15 |
≥4 |
≤18 |
||
|
WCA-8330 |
30-10 |
≥4 |
≤18 |
|||
|
Product Description |
Colour:gray/black powder, Crushed:irregular sharp. Agglomerated&Sintered is ball or samilar with ball with good fluidity: Use max temperature is 500C, the produt is high density. |
|||||
|
WC-8653 |
WC-Co-Cr 86/10/4 |
53-20 |
≥4 |
≤18 |
HVOF(JP5000, JP8000/DJ2600/DJ2700 Jet kote/WokaJet/K2 HAVF APS |
HV0.3:(1500-1400) anchoring strength≥ 70Ma deposition rate: 40%-55% porosity ≤1% |
|
WC-8645 |
45-15 |
≥4 |
≤18 |
|||
|
WCA-8645 |
WC-Co-Cr 86/10/4 |
45-15 |
≥4 |
≤18 |
||
|
WCA-4630 |
30-10 |
≥4 |
≤18 |
|||
|
Product Description |
CoCr matrix shows higher corrosion and abrasion resistance than Co matrix Hard chrome replacement Extremely smooth surface finish achievable Used for paper rolls, gate and ball valves, hydraulic cylinders, compressor shafts, mudpump rotors |
|||||
|
세라믹 분말 Ceramic Powder |
|||
|
제품명 Powder Type |
분말 크기 Particle Size |
경도 Hardness |
적용분야 Typical Properties and Applications |
|
＞99.50% Al2O3 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 60-70 |
APS White Coating, Resistance againse corrosion, abrasion, erosion and sliding wear Excellent Dielectric properties Stable in most acids and alkalis |
|
＞99.50% TiO2 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 50-55 |
APS White Coating. The coating is tough and compact, with high adhesion streangth, wear resistance, abrasive wear and hard surface wear resistance. For pump seals, plungers, marine propeller shaft, bearing sleeve and other parts. |
|
99.50% Cr2O3 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 65-70 |
APS Hard, corrosion and wear resistant ceramic coatings Insoluble in acids, alkalis and alcohol Used for anilox rolls in printing machines, pump seals areas, wear ring, etc. |
|
Al2O3-TiO2 97/3 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 60-70 |
APS High hardness, compact coating, low porosity, wear resistance, corrosion resistance and high remperature resistance. Used as a pump. Anti-cavitation coating for cylinder liner and turbine blade, abrasion-resistant coating for slurry pump plunger, mechanical seal, valve, fiber friction coating for guide wheel and friction disc of textile machinery. |
|
Al2O3-TiO2 87/13 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 60-70 |
APS Hydraulic parts, Plungers, Automotive parts, Textile manufacturing components and tooling nn Components for the chemical indusrty, Electrical insulation and direlectric applications |
|
Al2O3-TiO2 80/20 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 60-70 |
APS The coating is compact, high bonding strength, good toughness, corrosion resistance and abrasion resistance. Used as a corrosion- resistant and wear-resistant coating under 540C temperature, such as for the repair of pump shaft, compressor shaft, textile machinery guide wire wheel, roller and other components |
|
Al2O3-TiO2 50/50 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 60-70 |
APS Moderate wear resistance compared with Al2O3 or Al2O3-TiO2 Soluble in alkalis and sulfuric acid Decorative black coatings Slightly conductive |
|
Al2O3-TiO2 50/50 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 50-60 |
APS Moderate hardness, fine coating, fiber wear resistance, corrosion resitstance, wide application and textile workpiece |
|
Al2O3-Cr2O2 97/3 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 60-70 |
APS Grey alumina for use as corrosion, abrasion, erosion and sliding wear resistant coatings Typical applications in textile machines for guiding and handing of thread, rolls in paper industry, etc. |
|
Al2O3-ZrO2 70/309 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 50-55 |
APS Heat resistant and gas-fired corrosion coating. |
|
99.50%Cr2O3 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HV0.3 900-1200 |
APS Hard, corrosion and wear resistant ceramic coatings Insoluble in acids, alkalis and alcohol Used for anilox rolls in printing machines, pump seals areas, wear rings, etc. |
|
Cr2O3-SiO2-TiO2 92/5/3 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 60-70 |
APS Hard, dense and wear resistance coatings Good corrosion resistance Higher mechanical shock resistance than pore Cr2O3 |
|
TiO2-Cr2O3 55/45 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
HRC 55-65 |
APS The coating is compact, tough, wear-resistant, corrosion-resistant, antistatic, infrared radiation and black body absorption, Used for spraying chemical pump plunger, compressor shaft, mechanical seal ring, solar energy absorption device, electrothermal body and other components |
|
ZrO2-Y2O3 92-8 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
/ |
APS Used for thermal barrier coatings, protection of graphite sheets, etc. |
|
ZrO2-Y2O3 80-20 |
75-+48㎛ 45-+15㎛ 38-+55㎛ |
/ |
APS Thermal barrier coatings for rocket engine, aero turbine and industrial gas turbine components. Partcle erosion resistant coatings for rocket nozzles and missile nose cones. |
